V-5800 N.C. 3-Way Vacuum Piloted Valve - Air Logic

CAD模型選擇

HELP_VARIABLE


PREVIEW Preview
PRODUCT_ID Product ID	V580028PM V580028PM
MANUFACTURER_PART_NUMBER Manufacturer Part Number	V580028PM V580028PM
PRODUCT_NAME Product Name	V-5800 N.C. 3-Way Vacuum Piloted Valve - V580028PM V-5800 N.C. 3-Way Vacuum Piloted Valve - V580028PM
PRODUCT_LONG_DESCRIPTION Product Long Description	Vacuum controlled 3 Way Valves apply signal pressure to a diaphragm that is opposed by a spring force. When then vacuum signal force is greater (deeper vacuum = more force) than the spring force it reaches its set-point (also called “On” pressure), the internal mechanism moves and changes the pneumatic state The signal pressure and pneumatic circuit are completely isolated from each other The pneumatic circuit is normally closed, which means the supply port is closed and the output port is vented through the exhaust to the atmosphere. There is no connection available on the exhaust port When the valve trips, the supply is opened to the output port and the exhaust is off. The valve will remain in this state until the pressure signal drops below its reset point (also called “Off” pressure) The difference between the “On” pressure and the “Off” pressure is defined as the Differential or Hysteresis of the valve Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part number Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will raise the Set point. Counter clockwise adjustments will lower the setpoint (on pressure). Adjusting preset 3-way valves is not recommended. Do not back out the flat head screw above flush with the body
PART_NUMBER_DESCRIPTION Part Number Description	Panel Mount 1/8-27 NPS N.C. 3-Way Vacuum Piloted Valve 28" Panel Mount 1/8-27 NPS N.C. 3-Way Vacuum Piloted Valve 28"
VALVE_OPERATION valve operation	Normally Cosed - Senses Vacuum/Turns Output ON
PORT_TYPE port type	Barb for 1/16" I.D. Tubing Barb for 1/16" I.D. Tubing
PRESSURE_RANGE pressure range	1.5 bar to 8 bar
SENSING_RANGE sensing range	3.5 to 28° Hg 3.5 to 28° Hg
NOMINAL_ORIFICE_SIZE nominal orifice size	2 mm
MOUNTING_TYPE mounting type	Panel Mount 1/8-27 NPS Panel Mount 1/8-27 NPS
INCH_METRIC inch metric	Inch
FITTINGS fittings	1/16" & 4 mm Push to Connect 1/16" & 4 mm Push to Connect
AIR_CONSUMPTION_AT_6_BAR air consumption at 6 bar	.7 l/min
WETTED_MATERIAL wetted material	Buna and Nylon
BARB barb	1/16" 1/16"