피드백을 통해 제안을 제출하거나 온라인 고객 서비스에 문의할 수 있습니다. 신속하게 개선하겠습니다.:
지원
확인
??
지원되는 타사 쿠키 없음
귀하의 브라우저는 타사 쿠키 설정을 허용하지 않습니다. 브라우저 설정에서 활성화하거나 아래 버튼을 클릭하십시오.
새 탭에서 페이지 내용을 열려면 여기를 클릭하십시오.
열려 있는 페이지가 처음에 작동하지 않는 경우 페이지를 다시 로드해 보십시오.
파트커뮤니티가 작동하려면 브라우저에서 쿠키를 활성화하십시오.
카탈로그 탐색
전체 카탈로그
형상검색
스케치 검색
변수 검색
공인 카탈로그
378308 epos2 24 5
Maxon Motor
controller
Powered by
CAD모델 선택
{maxon_motor/controller/378308.prj},{NB=378308_epos2_24_5},{ORDERNO=378308_epos2_24_5},{ADVANCED_AUTOMATIC_CONTROL_SETTINGS=Yes},{ANALOG_INPUTS=2},{ANALOG_SET_VALUE=Yes},{AUXILIARY_OUTPUT_VOLTAGE=+VCC , max. 1300 mA},{BUILT_IN_MOTOR_CHOKE_PER_PHASE=15 µH},{CAN=Yes},{CANOPEN=Master},{CANOPEN_APPLICATION_LAYER=DS-301},{CANOPEN_FRAMEWORKS=DSP-305, DS-302},{CANOPEN_HOMING_MODE=Yes},{CANOPEN_PROFILE_FOR_IEC_61131_3_PROGRAMMABLE_DEVICE=DSP-405},{CANOPEN_PROFILE_POSITION_MODE=Yes},{CANOPEN_PROFILE_VELOCITY_MODE=Yes},{CANOPEN_PROFILES_MOTION_CONTROL=DSP-402},{CONTINUOUS_OUTPUT_CURRENT_ICONT=5 A},{CONTROL_OF_HOLDING_BRAKES=Yes},{CURRENT_CONTROLLER=Yes},{CURRENT_MODE=Yes},{DC_MOTORS_UP_TO=120 W},{DIGITAL_HALL_SENSORS__EC_MOTORS_=Yes}
기술적 기준에 따라 원하는 제품을 선택하십시오. 선택할 수 있는 속성은 테이블 아이콘으로 표시됩니다. 선택은 테이블의 아이콘이나 값에 따라 재설정 됩니다.
HELP_VARIABLE
ORDERNO
378308_epos2_24_5
ADVANCED_AUTOMATIC_CONTROL_SETTINGS
advanced automatic control settings
Yes
ANALOG_INPUTS
analog inputs
2
ANALOG_SET_VALUE
analog set value
Yes
AUXILIARY_OUTPUT_VOLTAGE
auxiliary output voltage
+VCC , max. 1300 mA
BUILT_IN_MOTOR_CHOKE_PER_PHASE
built-in motor choke per phase
15 µH
CAN
can
Yes
CANOPEN
canopen
Master
CANOPEN_APPLICATION_LAYER
canopen application layer
DS-301
CANOPEN_FRAMEWORKS
canopen frameworks
DSP-305, DS-302
CANOPEN_HOMING_MODE
canopen homing mode
Yes
CANOPEN_PROFILE_FOR_IEC_61131_3_PROGRAMMABLE_DEVICE
canopen profile for iec 61131-3 programmable device
DSP-405
CANOPEN_PROFILE_POSITION_MODE
canopen profile position mode
Yes
CANOPEN_PROFILE_VELOCITY_MODE
canopen profile velocity mode
Yes
CANOPEN_PROFILES_MOTION_CONTROL
canopen profiles motion control
DSP-402
CONTINUOUS_OUTPUT_CURRENT_ICONT
continuous output current icont
5 A
CONTROL_OF_HOLDING_BRAKES
control of holding brakes
Yes
CURRENT_CONTROLLER
current controller
Yes
CURRENT_MODE
current mode
Yes
DC_MOTORS_UP_TO
dc motors up to
120 W
DIGITAL_HALL_SENSORS__EC_MOTORS_
digital hall sensors (ec motors)
Yes
DIGITAL_INCREMENTAL_ENCODER__2_CHANNEL__DIFFERENTIAL_
digital incremental encoder (2-channel, differential)
Yes
DIGITAL_INCREMENTAL_ENCODER__3_CHANNEL__DIFFERENTIAL_
digital incremental encoder (3-channel, differential)
Yes
DIGITAL_INPUTS
digital inputs
6
DIGITAL_OUTPUTS
digital outputs
4
DIMENSION__HEIGHT_
dimension (height)
24 mm
DIMENSION__LENGTH_
dimension (length)
105 mm
DIMENSION__WIDTH_
dimension (width)
83 mm
DIP_SWITCH
dip switch
10
EC_MOTORS_UP_TO
ec motors up to
120 W
ENABLE
enable
Yes
ENCODER_SIGNALS
encoder signals
A, A, B, B, I, I
ENCODER_SUPPLY_VOLTAGE
encoder supply voltage
+5 VDC, max. 100 mA
FUNCTIONALITY_OF_ANALOG_INPUTS
functionality of analog inputs
set value, general purpose
FUNCTIONALITY_OF_DIGITAL_INPUTS
functionality of digital inputs
limit switch, reference switch, general purpose, enable, quickstop, stepdirection set value, master encoder, position marker
FUNCTIONALITY_OF_DIGITAL_OUTPUTS
functionality of digital outputs
holding brake, general purpose, position compare, ready
FUNCTIONALITY_OF_THE_DIP_SWITCH
functionality of the dip switch
CAN Node-ID, CAN-Bus Termination CAN-S, CAN-Bus Termination CAN-M, Autobitrate CAN-M
GATEWAY_FUNCTION_RS232_TO_CAN
gateway function rs232-to-can
Yes
GATEWAY_FUNCTION_USB_TO_CAN
gateway function usb-to-can
Yes
GRAPHICAL_USER_INTERFACE
graphical user interface
EPOS Studio (incl. OpenPCS)
HALL_SENSOR_SIGNALS
hall sensor signals
H1, H2, H3
HALL_SENSOR_SUPPLY_VOLTAGE
hall sensor supply voltage
+5 VDC, max. 30 mA
HUMIDITY__NON_CONDENSING___MAX__
humidity (non-condensing) (max.)
90 %
HUMIDITY__NON_CONDENSING___MIN__
humidity (non-condensing) (min.)
5 %
IEC_61131_3_LIBRARY_FOR_CAN_MASTER
iec 61131-3 library for can master
IEC 61131-3 Standard-, Motion Control-, Maxon Utility-, CANopen function blocks and user libraries.
INSTALLATION_PROGRAM
installation program
EPOS Setup
INTERPOLATED_POSITION_MODE__PVT_
interpolated position mode (pvt)
Yes
LOGIC_SUPPLY_VOLTAGE_VC__MAX___OPTIONAL
logic supply voltage vc (max.) optional
24 V
LOGIC_SUPPLY_VOLTAGE_VC__MIN___OPTIONAL
logic supply voltage vc (min.) optional
11 V
MASTER_ENCODER_MODE
master encoder mode
Yes
MAX__EFFICIENCY
max. efficiency
92 %
MAX__ENCODER_INPUT_FREQUENCY
max. encoder input frequency
5 MHz
MAX__OUTPUT_CURRENT_IMAX
max. output current imax
10 A
MAX__OUTPUT_VOLTAGE__FACTOR_VCC_
max. output voltage (factor vcc)
0.9
MAX__SPEED__DC_
max. speed (dc)
100000 rpm
MAX__SPEED__EC__1_POLE_PAIR__BLOCK_COMMUTATION
max. speed (ec; 1 pole pair) block commutation
100000 rpm
MAX__SPEED__EC__1_POLE_PAIR__SINUSOIDAL_COMMUTATION
max. speed (ec; 1 pole pair) sinusoidal commutation
25000 rpm
MAX__TIME_OF_PEAK_OUTPUT_CURRENT_IMAX
max. time of peak output current imax
1 s
MOUNTING
mounting
Flange for M3 screws
OPERATING_SYSTEM
operating system
Windows 10, 8, 7, Windows XP SP3
OPERATING_VOLTAGE_VCC__MAX__
operating voltage vcc (max.)
24 V
OPERATING_VOLTAGE_VCC__MIN__
operating voltage vcc (min.)
11 V
PATH_GENERATOR_WITH_SINUSOIDALTRAPEZOIDAL_PROFILES
path generator with sinusoidaltrapezoidal profiles
Yes
PC_MASTER
pc master
IXXAT, Vector, National Instruments, Kvaser, NI-XNET
POSITION_COMPARE
position compare
Yes
POSITION_CONTROL_FEED_FORWARD
position control feed forward
Yes
POSITION_CONTROLLER
position controller
Yes
POSITION_MARKER_TOUCH_PROBE
position marker touch probe
Yes
POSITION_MODE
position mode
Yes
PROGRAMMING_EXAMPLES
programming examples
MS Visual C#, MS Visual C++, MS Visual Basic, MS Visual Basic.NET, MS Visual Basic.NET, Borland Delphi, NI LabView
PROTECTIVE_FUNCTIONS
protective functions
current limit, overcurrent, excess temperature, undervoltage, overvoltage, voltage transients, short-circuits in the motor cable
PWM_CLOCK_FREQUENCY_OF_POWER_STAGE
pwm clock frequency of power stage
50 kHz
QUICKSTOP
quickstop
Yes
RESOLUTION__RANGE__CIRCUIT
resolution, range, circuit
12-bit, 0…+5V
RS232
rs232
Yes
SAMPLING_RATE_PI_CURRENT_CONTROLLER
sampling rate pi current controller
10 kHz
SAMPLING_RATE_PI_SPEED_CONTROLLER
sampling rate pi speed controller
1 kHz
SAMPLING_RATE_PID_POSITIONING_CONTROLLER
sampling rate pid positioning controller
1 kHz
SPEED_CONTROLLER__CLOSED_LOOP_
speed controller (closed loop)
Yes
STATUS_INDICATOR_ERROR
status indicator error
red LED
STATUS_INDICATOR_READY
status indicator ready
green LED blue LED (programm status)
STEPDIRECTION_MODE
stepdirection mode
Yes
TEMPERATURE___EXTENDED_RANGE
temperature – extended range
+55…+83°C, Derating -0.179 A°C
TEMPERATURE___OPERATION__MAX__
temperature – operation (max.)
55 °C
TEMPERATURE___OPERATION__MIN__
temperature – operation (min.)
-10 °C
TEMPERATURE___STORAGE__MAX__
temperature – storage (max.)
85 °C
TEMPERATURE___STORAGE__MIN__
temperature – storage (min.)
-40 °C
USB_2_0__FULL_SPEED_
usb 2.0 (full speed)
Yes
VELOCITY_CONTROL__FEED_FORWARD_
velocity control (feed forward)
Yes
VELOCITY_MODE
velocity mode
Yes
WEIGHT
weight
180 g
WINDOWS_DLL_FOR_PC
windows dll for pc
32-64-bit
WITHOUT_SENSOR__DC_MOTORS_
without sensor (dc motors)
Yes
NAME
name
378308_epos2_24_5
CAD모델 다운로드
CAD 파일 생성
PDF 데이터시트 생성
견적요청
미리보기