Cable version - Electrical installation duct

CAD model selection

HELP_VARIABLE

FIRMA

Manufacturer

Wichmann Brandschutzsysteme GmbH & Co. KG

ARTNR

Article Number

IFKM110050w

DESCSHORT

Description short text

Instafix® BKI cable version with Mifa bulkhead, 1 set, 100x50x50mm, pure white

Field of use

Direct or suspended mounting of the Instafix BKI duct on the wall and/or ceiling

Fire resistance class

I90

LODLEVEL

LOD Level

VORSCHAUBILD

Preview picture

COVER

Styrofoam cover

External height (HA)

103.2

Outer width (BA)

53.2

Depth (T)

External height including brackets (HL)

160

External width including tabs (BL)

110

Height of the usable opening (internal dimensions) (HI)

100

Width of the usable opening (internal dimension) (BI)

Usable cross-section

5000

mm²

Weight

0.2

GTIN

4251636715745

Material

Hot-dip galvanized sheet metal with internal intumescent layer

DESCLONG

Description long text

Cable version with mineral fiber insulation for Wichmann INSTAFIX ® BKI installation duct, pure white. 1 set consisting of 1 sheet metal part and 1 mineral fiber cut. The Wichmann INSTAFIX ® BKI installation duct is especially suitable for installation in escape and rescue routes and is made of hot-dip galvanized sheet metal, stainless steel or optionally in various RAL tones. Thanks to the up to 95% thinner wall thickness compared to other ducts, the usable cross section is significantly increased. In this way, the Wichmann INSTAFIX ® BKI installation duct can be installed quickly and easily, even in confined spaces. The Wichmann INSTAFIX ® BKI installation duct is supplied as an industrially prefabricated, functional and ready-to-install component. The Wichmann INSTAFIX ® BKI installation duct is classified for the fire resistance classes I30 to I120 according to DIN 4102 and has a general type approval in Germany. Assembly is carried out in accordance with the enclosed assembly instructions or aBG Z-19.30-2524. System benefits: Protection of escape and rescue routes from the effects of cable fires. Active fire load encapsulation and prevention of fire spread thanks to innovative intumescent coating. Reduces consequential damage and costs of a cable fire to a minimum. Various designs are possible: 4-, 3- and 2-sided from a size of 30 x 30 mm. Effortless and quick installation thanks to the particularly slim, lightweight design and tailor-made molded parts. Easy to assemble without fasteners. Direct wall and ceiling mounting, mounting below system shelves or on support systems possible. Support distance suspended up to 2100 mm. With direct mounting distance between mounting points up to 500 mm. Custom-fit, prefabricated trunking elements are even suitable for difficult installation situations. Pre-assembled moldings available. The creation of molded parts is also possible on site. Ideal for retrofitting. Thanks to the removable cover, it can be continuously inspected. 100% assignable with cables and pipes. Possible cable load of up to 34 kg/m with a direct load on the trunking floor. Thanks to the dust-free installation, it is particularly suitable for sensitive installation scenarios such as hospitals, clean rooms or data centers.

TENDER

Tender text

Cable version with mineral fiber insulation for Wichmann INSTAFIX ® BKI installation duct, pure white. 1 set consisting of 1 sheet metal part and 1 mineral fiber cut. The installation duct has been tested in accordance with DIN 4102 Part 11 and provides proof of usability for fire resistance class I 30 - I 120 through a general type approval. The installation duct can be used in places in buildings where protection of the environment (e.g. escape and rescue routes, corridors, ceiling cavities, raised floors) from the effects of a cable fire is required. The installation duct is delivered as an industrially prefabricated, functional and ready-to-install component and must be able to be inspected throughout. The installation duct is manufactured on 4 sides as standard, but it can also be manufactured on 2 or 3 sides as an option. It must also be possible to create molded parts on site. The installation duct must be dust-free, impact and impact resistant. It is made of hot-dip galvanized sheet metal as standard, but can also be made of stainless steel or in various RAL colors as an option. The wall thickness of the installation duct must be 1.6 - 3.0 mm with a surface weight of approx. 6.5 kg/m² to 10.5 kg/m². The intumescent layer must not be removable. Evidence of the durability of the building material must be provided by internal and external monitoring. Cable duct system: Lead brand INSTAFIX ® BKI installation duct, item description: Instafix® BKI cable version with Mifa bulkhead, 1 set, 100x50x50mm, pure white, item number: IFKM110050w, consisting of white sheet steel (alternatively another RAL color) 0.6 - 1.0 mm thick ; Approval basis: Approved by DIBt Berlin under number Z-19.30-2523, installation according to aBG Z-19.30-2524. Source of supply: Wichmann Brandschutzsysteme GmbH & Co. KG, Siemensstraße 7, 57439 Attendorn, Tel.: 02722 / 6382-0, Fax.: 02722 / 6382-299, e-mail: info@wichmann.biz, www.wichmann.biz.

ETIM8

Class ETIM-8.0

EC002670, Accessories/spare parts for fire-resistant duct

EF000215

Art des Zubehörs

Cable outlet

MAQA

Assembly instructions

Installation instructions Instafix BKI installation duct

TDQA

Technical data sheet

Technical data sheets Instafix BKI installation duct white