F-5500 Series Solid State Pressure Switch - Air Logic

CAD model selection

HELP_VARIABLE


PREVIEW Preview	../../_pool_/1e/f5/90-20072021-044697l.png ../../_pool_/1e/f5/90-20072021-044697l.png
PRODUCT_ID Product ID	F550015PTB85 F550015PTB85
MANUFACTURER_PART_NUMBER Manufacturer Part Number	F550015PTB85 F550015PTB85
PRODUCT_NAME Product Name	F-5500 Series Solid State Pressure Switch - F550015PTB85 F-5500 Series Solid State Pressure Switch - F550015PTB85
PRODUCT_LONG_DESCRIPTION Product Long Description	This pressure switch uses a Hall Effect Sensor to determine the mechanical movement of the diaphragm. There are no electrical contacts in the switch to wear or fail. This switch requires an AMP 102241-1 connector and external (not provided) circuitry to function. Please see VX Series installation instructions for more information Pressure switches apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its set-point (also called “On” pressure), the internal mechanism moves and changes the electrical state. When the switch trips, the normally open circuit closes and the normally closed circuit opens. The switch will remain in this state until the pressure signal drops below its reset point (also called “Off” pressure) The difference between the “On” pressure and the “Off” pressure is defined as the Differential or Hysteresis of the switch. This is an important characteristic for applications such as pressure switch-controlled compressor systems. For instance, the consumption and capacity of the system along with the differential of the switch will determine how often the compressor runs. Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part number. Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will raise the Set point. Counter clockwise adjustments will lower the setpoint (on pressure). Adjusting preset switches is not recommended. Do not back out the flat head screw above flush with the body.
PART_NUMBER_DESCRIPTION Part Number Description	Pipe Thread Mount 1/8-27 NPT Solid State Pressure Switch 15 PSI 24 VDC Pipe Thread Mount 1/8-27 NPT Solid State Pressure Switch 15 PSI 24 VDC
ADJUSTMENT_RANGE adjustment range	0.5 to 15 PSI 0.5 to 15 PSI
PORT_TYPE port type	Barb for 1/8" I.D. Tubing Barb for 1/8" I.D. Tubing
SWITCH_TYPE switch type	4.5 to 24 VDC
PERMANENT_1_L permanent 1 l
MOUNTING_TYPE mounting type	Pipe Thread Mount 1/8-27 NPT Pipe Thread Mount 1/8-27 NPT
INCH_METRIC inch metric	Inch
TYPE type	F-5500
BARB barb	1/8" 1/8"