피드백을 통해 제안을 제출하거나 온라인 고객 서비스에 문의할 수 있습니다. 신속하게 개선하겠습니다.:
지원
확인
??
지원되는 타사 쿠키 없음
귀하의 브라우저는 타사 쿠키 설정을 허용하지 않습니다. 브라우저 설정에서 활성화하거나 아래 버튼을 클릭하십시오.
새 탭에서 페이지 내용을 열려면 여기를 클릭하십시오.
열려 있는 페이지가 처음에 작동하지 않는 경우 페이지를 다시 로드해 보십시오.
파트커뮤니티가 작동하려면 브라우저에서 쿠키를 활성화하십시오.
카탈로그 탐색
전체 카탈로그
형상검색
스케치 검색
변수 검색
공인 카탈로그
F550015PTB85
Air Logic
Switches
Pressure Switch
Powered by
CAD모델 선택
{air_logic/switches/pressure20switch/f-550020series20solid20state20pressure20switch.prj},{NB=F550015PTB85},{PREVIEW=../../_pool_/1e/f5/90-20072021-044697l.png},{PRODUCT_ID=F550015PTB85},{MANUFACTURER_PART_NUMBER=F550015PTB85},{PRODUCT_NAME=F-5500 Series Solid State Pressure Switch - F550015PTB85}
기술적 기준에 따라 원하는 제품을 선택하십시오. 선택할 수 있는 속성은 테이블 아이콘으로 표시됩니다. 선택은 테이블의 아이콘이나 값에 따라 재설정 됩니다.
HELP_VARIABLE
PREVIEW
Preview
../../_pool_/1e/f5/90-20072021-044697l.png
../../_pool_/1e/f5/90-20072021-044697l.png
PRODUCT_ID
Product ID
F550015PTB85
F550015PTB85
MANUFACTURER_PART_NUMBER
Manufacturer Part Number
F550015PTB85
F550015PTB85
PRODUCT_NAME
Product Name
F-5500 Series Solid State Pressure Switch - F550015PTB85
F-5500 Series Solid State Pressure Switch - F550015PTB85
PRODUCT_LONG_DESCRIPTION
Product Long Description
This pressure switch uses a Hall Effect Sensor to determine the mechanical movement of the diaphragm. There are no electrical contacts in the switch to wear or fail. This switch requires an AMP 102241-1 connector and external (not provided) circuitry to function. Please see VX Series installation instructions for more information Pressure switches apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its set-point (also called “On” pressure), the internal mechanism moves and changes the electrical state. When the switch trips, the normally open circuit closes and the normally closed circuit opens. The switch will remain in this state until the pressure signal drops below its reset point (also called “Off” pressure) The difference between the “On” pressure and the “Off” pressure is defined as the Differential or Hysteresis of the switch. This is an important characteristic for applications such as pressure switch-controlled compressor systems. For instance, the consumption and capacity of the system along with the differential of the switch will determine how often the compressor runs. Factory preset options are available. Please contact your salesperson or distributor for specifications and a custom part number. Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will raise the Set point. Counter clockwise adjustments will lower the setpoint (on pressure). Adjusting preset switches is not recommended. Do not back out the flat head screw above flush with the body.
PART_NUMBER_DESCRIPTION
Part Number Description
Pipe Thread Mount 1/8-27 NPT Solid State Pressure Switch 15 PSI 24 VDC
Pipe Thread Mount 1/8-27 NPT Solid State Pressure Switch 15 PSI 24 VDC
ADJUSTMENT_RANGE
adjustment range
0.5 to 15 PSI
0.5 to 15 PSI
PORT_TYPE
port type
Barb for 1/8" I.D. Tubing
Barb for 1/8" I.D. Tubing
SWITCH_TYPE
switch type
4.5 to 24 VDC
PERMANENT_1_L
permanent 1 l
MOUNTING_TYPE
mounting type
Pipe Thread Mount 1/8-27 NPT
Pipe Thread Mount 1/8-27 NPT
INCH_METRIC
inch metric
Inch
TYPE
type
F-5500
BARB
barb
1/8"
1/8"
CAD모델 다운로드
CAD 파일 생성
PDF 데이터시트 생성
견적요청
미리보기