No Third-party Cookies supported

Your browser does not allow setting Third-party cookies. Please enable them in your browsers settings or click the button below.

Please enable cookies in your browser for PARTcommunity to work
Catalog navigation
All catalogs
Geometric Search
Sketch Search
Variable Search
Certified catalogs

R610010B85

  1. Air Logic
  3. Relief Valves
CAD model selection
PREVIEW
Preview
../_pool_/6d/ab/90-20072021-043945l.png
PRODUCT_ID
Product ID
R610010B85
MANUFACTURER_PART_NUMBER
Manufacturer Part Number
R610010B85
PRODUCT_NAME
Product Name
Relief Valves - R610010B85
PRODUCT_LONG_DESCRIPTION
Product Long Description
Relief valves open the input port to the exhaust port when a specific pressure differential (ie. setpoint) is achieved. A diaphragm provides area for pressure supplied from the input port to act against the spring force. When the force of the input pressure exceeds the spring force, the valve opens. The valve stays open until the input pressure drops below the setpoint Ports can be supplied with straight or barbed fittings. A single barbed version is available when the exhaust port does not require a barb.
PART_NUMBER_DESCRIPTION
Part Number Description
Adjustable Relief Valve, .5 to 10psi adjustment, 1/8 Inch barbs
TUBING_INSIDE_DIAMETER_ID_IN
Tubing Inside Diameter ID
1/8
 Inch
CONNECTION_TYPE
Connection Type
Barbed
TYPICAL_TUBE_RETENTION_PRESSURE_BAR
Typical Tube Retention Pressure
8.6
 bar
TYPICAL_TUBE_RETENTION_PRESSURE_PSI
Typical Tube Retention Pressure
125
 psi
MAXIMUM_PRESSURE_BAR
Maximum Pressure
2.1 bar
MAXIMUM_PRESSURE_PSI
Maximum Pressure
30 psi
PRESETS_AVAILABLE
Presets Available
Factory Preset Available
RECOMMENDED_SYSTEM_FILTRATION_UM
Recommended System Filtration
5 μm
ADJUSTMENT_RANGE_PSI
Adjustment Range
0.25 to 10
 psi
BLEED_PORT_DIAMETER_IN
Bleed Port Diameter
0.02 Inch
WETTED_MATERIAL
Wetted Material
Polysulfone (PSU); Silicone (Si)
BARB
Barb
1/8
 Inch
Download CAD models
Previews