RSHE - Imperial

Выбор CAD модели

HELP_VARIABLE


PARTNBR Part No.	RSHE-143-CSOP-TW RSHE-143-CSOP-TW
NO no.	143 143
D1 Application Diameter	1.438 1.438	Дюйм
D1FRAC d1 frac	1 7/16 1 7/16
S Ring Thickness	0.050 0.050	Дюйм
STOLUP Ring Thickness Tolerance Up	0.002 0.002	Дюйм
STOLDWN Ring Thickness Tolerance Down	-0.002 -0.002	Дюйм
D3 Ring Diameter	1.596 1.596	Дюйм
D3TOLUP Ring Tolerance Up	0.025 0.025	Дюйм
D3TOLDWN Ring Tolerance Down	-0.020 -0.020	Дюйм
A Lug Height (INCH)	0.201 0.201	Дюйм
ATOLUP Lug Height Tolerance Up	0.006 0.006	Дюйм
ATOLDWN Lug Height Tolerance Down	-0.006 -0.006	Дюйм
B Radial Wall	0.133 0.133	Дюйм
BTOLUP Ring Radial Wall Tolerance Up	0.006 0.006	Дюйм
BTOLDWN Ring Radial Tolerance Down	-0.006 -0.006	Дюйм
C Taper Width (INCH)	0.065 0.065	Дюйм
CTOLUP	0.006 0.006	Дюйм
CTOLDWN	-0.006 -0.006	Дюйм
D5 Lug Inside Diametaer (INCH)	0.078 0.078	Дюйм
D5TOLUP Lug ID Tolerance Up	0.015 0.015	Дюйм
D5TOLDWN Lug ID Rolerance DOWN	-0.002 -0.002	Дюйм
D2 Groove Diameter	1.528 1.528	Дюйм
D2TOLUP Groove Diameter Tolerance Up	0.004 0.004	Дюйм
D2TOLDWN Groove Diameter Tolerance Down	-0.004 -0.004	Дюйм
M Groove Width	0.056 0.056	Дюйм
MTOLUP Groove Width Tolerance Up	0.004 0.004	Дюйм
MTOLDWN Groove Width Tolerance Down	0.000	Дюйм
N Edge Margin	0.135 0.135	Дюйм
FN Groove Yield	5500 5500	lb
FR Ring Shear	10353 10353	lb
G Max chamfer/radius	0.038 0.038	Дюйм
FRG Ring Shear @ Max Chamfer/Radius	2,4 2,4	Дюйм
PS Pliers Straight	J2 J2
PB Pliers Bent	J21 J21
MAT Material	Spring steel SAE 1074 Spring steel SAE 1074
HARDNESS Hardness	Scale C 47 ÷ 52 Scale C 47 ÷ 52
FINISH Finish Type	phosphated and oiled
EXT Base Extrude	2 2
TP Type	Internal
SS Smalley Series	Tapered Section
DC Delivery Country	These products are only available in the USA

Не поддерживаются сторонние файлы Cookies

RSHE-143-CSOP-TW