RSSE - Imperial

Выбор CAD модели

HELP_VARIABLE


PARTNBR Part No.	RSSE-112-CSOP-BX RSSE-112-CSOP-BX
NO no.	112 112
D1 Application Diameter	1.125 1.125	Дюйм
D1FRAC d1 frac	1 1/8 1 1/8
S Ring Thickness	0.050 0.050	Дюйм
STOLUP Ring Thickness Tolerance Up	0.002 0.002	Дюйм
STOLDWN Ring Thickness Tolerance Down	-0.002 -0.002	Дюйм
D3 Ring Diameter	1.041 1.041	Дюйм
D3TOLUP Ring Tolerance Up	0.010 0.010	Дюйм
D3TOLDWN Ring Tolerance Down	-0.015 -0.015	Дюйм
A Lug Height (INCH)	0.182 0.182	Дюйм
ATOLUP Lug Height Tolerance Up	0.004 0.004	Дюйм
ATOLDWN Lug Height Tolerance Down	-0.004 -0.004	Дюйм
B Radial Wall	0.128 0.128
BTOLUP Ring Radial Wall Tolerance Up	0.006 0.006	Дюйм
BTOLDWN Ring Radial Wall tolerance Down	-0.006 -0.006	Дюйм
C Taper Width	0.071 0.071	Дюйм
CTOLUP C up	0.006 0.006	Дюйм
CTOLDWN c down	-0.006 -0.006	Дюйм
D5 Lug Inside Diameter (INCH)	0.078 0.078
D5TOLUP Lug ID Tolerance Up	0.015 0.015	Дюйм
D5TOLDWN Luf ID Tolerance Down	-0.002 -0.002	Дюйм
D2 Groove Diameter	1.059 1.059	Дюйм
D2TOLUP Groove Diameter Toletance Up	0.004 0.004	Дюйм
D2TOLDWN Groove Diameter Tolerance Down	-0.004 -0.004	Дюйм
M Groove Width	0.056 0.056	Дюйм
MTOLUP Groove Width Tolerance Up	0.004 0.004	Дюйм
MTOLDWN Groove Width Tolerance Down	0.000	Дюйм
N Edge Margin	0.099 0.099	Дюйм
FN Groove Yield	2600 2600	lb
FR Ring Shear	6699 6699	lb
G Max Chamfer/Radius	0.038 0.038	Дюйм
FRG Ring Shear @ Max Chamfer/Radius	1.000 1.000	Дюйм
MR Max RPM	18.000 18.000
PS Pliers Straight	A2 A2
PB Pliers Bent	A21 A21
MAT Material	Spring steel SAE 1074 Spring steel SAE 1074
HARDNESS Hardness	HRC 47 ÷ 52 HRC 47 ÷ 52
FINISH Finish	phosphated and oiled
TP Type	External
SS Smaley Series	Tapered Section
DC Delivery Country	These products are only available in the USA

Не поддерживаются сторонние файлы Cookies

RSSE-112-CSOP-BX